GF-35A clc machine for cast in situ put cement and water into a slurry mixing and then mix them in a certain proportion, press them into transmission pipelines through hydraulic cylinder; According to a certain proportion foam mixed with water and then mixed with compressed air by the high-pressure pump; In the pipeline it form the high-density foam and meticulous, at last form the foam cement with the slurry in the pipeline. Read More
GFC1000-H foam concrete machine is composed of mixer, agitator, foam generator, hose pump, equipped with screw feeder, belt conveyor and submersible pump. The equipment is equipped with a weighing sensor and automatic batching system, which can set each batching weight and realize automatic feeding and full mixing. The process is completely controlled by the auto-weighing system. After the preparation work is completed, press the automatic button to start the automatic working. The mixer is started to mixing. Sand, cement, water and foaming agent are loaded in turn and mixed quickly after reaching the set weight. After the mixing is even, open the discharge door. The mixture flow down into the lower screen of the agitator. The low speed mixing blades are equipped in this agitator. After the mixture completely flow down, close the door and continue the next batch mixing. At the same time, start the hose pump to pump the foam concrete mixture to the work site. Read More
GF10 Lightweight Foam Concrete Machine for Floor Heating is also called cellular concrete, it is mixed with water, cement and foaming agent (mainly divided it into synthesis product and animal products) according to the proportion. The specific gravity of cellular concrete is 380~1600 kg/m3 after solidifying with machine transport, it can bear pressure of 0.3~8MPa. Foamed concrete is a foamed concrete product of good insulation, impermeability (cellular concrete can be waterproof by adding one process), thermal insulation, light weight, sound insulation, environmental protection. Read More