Precautions when using high-performance concrete foaming machine
The high-performance concrete foaming machine is mainly used for the production of thermal insulation materials in buildings. It consists of a full-machine stainless steel frame. The manufacturing cost is low and the uniformity of the impact mixing method is high. In recent years, with the continuous updating of high-performance concrete foaming machine technology, its performance has become more prominent and has become more and more widely used.
In the actual application process, how to perform a standardized operation using a high-performance concrete foaming machine:
1. Before working, high-performance concrete foaming machine should carefully check the component temperature and readjust if necessary. Check the silicone filter and drain the water collector, open the line-gap filter to drain the cock, and discharge the dirt; check the adjustment function of the metering pump, connect the hydraulic device and the metering pump power to exhaust the metering pump. Raw material tank pressure requires dry air, as far as possible with nitrogen. Before turning on the machine every day, turn the dial of the raw material filter and count left or right.
2. The machine should be meticulous before running.
3, high-performance concrete foaming machine for a long time, it is easy to heat up too high, so pay attention to timely cooling. When the motor is found to be overheating, the door of the foaming machine can be opened to allow natural ventilation. Or use a fan or blower to cool the motor. Or remove the casing next to the motor to increase its heat dissipation capacity.
4. During normal operation, the operator must not arbitrarily adjust the starting pressure of the high-performance concrete foaming machine safety valve.
5, often check the component temperature and verify the operating pressure of the metering pump, the metering pump is drained during shutdown or intermittent time.
6. When the laminator is not used for a long time, turn on the mold temperature machine and heat up the water vapor condensed on the surface of the template and the template to evaporate cleanly to avoid rusting the rabbit.
How to use high-performance concrete foaming machine:
1. The user connects the power supply according to the specified direction of the pump.
2. Add water to the water jacket and air tank of the two storage barrels before use.
3, the pouring machine A, B material liquid supply, open the automatic feeding port to cut off the door, open the automatic feeding switch, you can complete the automatic feeding process is fast and convenient.
4.Set the required time on the computer of the pouring machine, then open the sample port and cut off the door, turn on the automatic loading switch, weigh out the weight and weight difference of the material set within the set time, and adjust the A and B stop stations to Balance to the ratio required for work.
5. Pouring time setting Set the required working time according to the required amount and the flow rate of the machine. The pouring time can be set between 0-99.9 seconds with a setting accuracy of 1.
6.After the pouring time is set, turn on the air supply switch and move the wrench switch to start pouring. It will automatically stop when the set time is reached, but it should automatically supply air for 3-5 seconds to flush the remaining material and turn off the wrench switch. Rinse the gun head with water and gas to complete the work.
The above are the precautions and methods of using the high-performance concrete foaming machine. I hope you can use the high-performance concrete foaming machine to help you.
